中華人民共和國國家標準(中國大陸GB標準)英文版 |
GB標準是中華人民共和國國家標準,也叫GB國標,是中國大陸強制執行的國家標準,所有中國大陸境內銷售的商品及提供服務都必須符合GB國家標準的要求,包括進口商品及服務; 本網站提供GB國家標準的查詢檢索,英文版翻譯,GB標準產品檢測檢驗及合規性分析服務; |
GB/T 43116-2023 纤维增强塑料复合材料 包括缩减和扩展认证的复合材料标准认证方案(中英文版) Fiber Reinforced Plastic Composites Composite Standard Certification Scheme including Reduced and Extended Certification |
|||
GB/T 43113-2023 碳纤维增强复合材料耐湿热性能评价方法(中英文版) Evaluation method for heat and moisture resistance of carbon fiber reinforced composite materials |
|||
GB/T 43005-2023 给水用连续玻纤带缠绕增强聚乙烯复合管(中英文版) Continuous fiberglass tape wrapped reinforced polyethylene composite pipe for water supply |
|||
GB/T 1458-2023 纤维缠绕增强复合材料环形试样力学性能试验方法(中英文版) Test method for mechanical properties of fiber-wound reinforced composite ring specimens |
|||
GB/T 42911-2023 碳纤维增强复合材料 密封压力容器加速吸湿和过饱和调节方法(中英文版) Carbon fiber reinforced composite materials accelerated moisture absorption and supersaturation adjustment method for sealed pressure vessels |
|||
GB/T 42655-2023 连续纤维增强陶瓷基复合材料高温压缩性能试验方法(中英文版) Test method for high temperature compression properties of continuous fiber reinforced ceramic matrix composites |
|||
GB/T 42920-2023 塑料 纤维增强塑料复合材料耐火特性和防火性能的评定(中英文版) Plastics - Evaluation of fire resistance properties and fire performance of fiber reinforced plastic composites |
|||
GB/T 42542-2023 纤维增强复合材料 密封压力容器加速吸湿及过饱和状态调节方法(中英文版) Fiber-reinforced composite materials, sealed pressure vessel, accelerated moisture absorption and supersaturated state adjustment method |
|||
GB/T 24721.4-2023 公路用玻璃纤维增强塑料产品 第4部分:非承压通信井盖(中英文版) Glass fiber reinforced plastic products for road use - Part 4: Unpressurized communication manhole covers |
|||
HG/T 3731-2023 非金属化工设备 玻璃纤 维增强聚氯乙烯复合管 和管件(中英文版) Non-metallic chemical equipment Glass fiber reinforced polyvinyl chloride composite pipes and fittings |
|||
JC/T 2726-2022 玻璃纤维增强水泥(GRC)复合外墙板(中英文版) Glass fiber reinforced cement (GRC) composite exterior wall panels |
|||
GB/T 41501-2022 纤维增强塑料复合材料 双梁法测定层间剪切强度和模量(中英文版) Determination of interlaminar shear strength and modulus of fiber reinforced plastic composites by double beam method |
|||
GB/T 41498-2022 纤维增强塑料复合材料 用剪切框测定面内剪切应力/剪切应变响应和剪切模量的试验方法(中英文版) Test method for in-plane shear stress / shear strain response and shear modulus using shear frames for fiber reinforced plastic composites |
|||
GB/T 21239-2022 纤维增强塑料层合板冲击后压缩性能试验方法(中英文版) Test method for compressive properties of fiber reinforced plastic laminates after impact |
|||
GB/T 41762.2-2022 纤维增强塑料复合材料 层合板厚度方向性能的测定 第2部分:弯曲试验测定碳纤维单向层合板的弹性模量、强度和威布尔尺寸效应(中英文版) Fiber reinforced plastic composites - Determination of through-thickness properties of laminates - Part 2: Determination of elastic modulus, strength and Weibull size effect of carbon fiber unidirectional laminates by bending tests |
|||
GB/T 41879-2022 塑料 燃烧性能 纤维增强聚合物复合材料的中等尺寸耐火测试(中英文版) Plastics - Burning behavior - Medium-scale fire tests of fiber-reinforced polymer composites |
|||
GB/T 38535-2020 纤维增强树脂基复合材料工业计算机层析成像(CT)检测方法(中英文版) Test method on fiber reinforced resin matrix composites by industrial computed tomography (CT) |
|||
GB/T 38537-2020 纤维增强树脂基复合材料超声检测方法 C扫描法(中英文版) Ultrasonic testing method for fiber reinforced resin matrix composites—C-scan method |
|||
JC/T 2580-2020 纤维增强复合材料履带拉挤机(中英文版) Fiber Reinforced Composite Track Pultruder |
|||
GB/T 39549-2020 纤维增强热固性复合材料化粪池(中英文版) Fiber reinforced thermosetting composites septic tank |
找到:67條目 | [首頁]-[上一頁]-[下一頁]-[尾頁] | 去到: 1 2 3 4 |